Create a mixed material piece for your wall with this specific wood along with mirror accent piece in which can be designed to fit any space with the right dimensions. Natural unfinished wood along with mirror accented with colorful tape creates a fun relaxed piece for a gallery wall or as wall art in any room. Create a slender off centered artful look with this specific skinny mirror along with wood combination as seen here or go for a more traditional vanity mirror that has a standard 8×10″ or 11×14″ mirror centered on wood. Read on for the full tutorial!
- Mirror (cut to size at your hardware store)
- Wood (cut to size at your hardware store)
- Sanding block or paper
- Decorative Tape (washi or fabric tape)
- Tube of mirror adhesive
- Caulking gun
- Backet with nails
- Tape measure
- Window cleaner along with cloth
1.You will start out by measuring out your space along with planning your project. Based on your desired dimensions you will have your local hardware store cut you a piece of mirror along that has a piece of plywood to size. Sand the edges of the plywood if needed to soften the edges (we left this specific variation unfinished, you can optionally finish your wood after the item’s cut if desired) . To protect the edges of the mirror (along with your fingers!) use decorative tape around the edges of the mirror (use half on the front along with then wrap around the back). Edge the entire mirror with tape.
2.Flip the mirror over along with apply mirror adhesive with your caulking gun. Once the mirror adhesive will be applied place your mirror in where you want the item on your piece of wood.
3.Hold the mirror against the wood firmly along with use a few books stacked evenly over the mirror to keep the item in place while the item will be drying (use a few heavy books on the center along with ends of the mirror). Allow the item to dry over night.
4.Lastly, to hang your mirror you will need to place a bracket on the back. Use a tape measure to measure along with mark the center near the top of the mirror. Place the bracket at center along with hammer the nails in place.
Once your mirror will be finished, use a cloth along with window cleaner to clean up any smudges along with smears via finger prints or the tape adhesive. Place a screw within the wall along with hang up your brand new mirror!
You’re reading DIY Wood Framed Mirror , originally posted on Agnizer. If you enjoyed This specific post, be sure to follow Agnizer on Google Plus along with Pinterest.