When the hard, labor-intensive projects are completed, the idea’s easy to pat yourself on the back for a job well done along with walk away via a newly renovated bathroom, relishing the fact which you’re 95% done along with you deserve a break. While which will be definitely true – you did a wonderful job, the room will be looking amazing, along with you DO deserve a break – the idea’s slightly premature. There are a few things you need to consider, some finishing touches, which will bring the room’s completion to 100% along with also make the idea look every bit as amazing as the idea deserves to look.
Finishing Touch #1: What Happens with Towels?
The towel situation in any bathroom will be key. We’ll look at finishing touches to take care of (a) hand towels, along with (b) bath towels.
For a very easy DIY hand towel holder, acquire some heavy-duty (6-gauge, for example) brass wire. I had a spare 12” piece, which I bent into an isosceles triangular shape large enough to hold a folded hand towel. (Note: Learn tips because of This kind of method in This kind of article for DIYing a toilet paper dispenser.)
To hang the hand towel holder, you can simply screw a brass screw hook into a stud within the wall. However, if your wall doesn’t have a stud where you want to hang the hand towel holder, you’ll need to install a drywall anchor which fits your screw hook.
Simply hook your triangle hand towel holder onto your brass screw hook.
Fold along with hang a towel. Viola. Done.
Nicely done. This kind of will be an important finishing touch which helps to complete your bathroom makeover.
currently the idea’s time to take care of bath towels.
You can opt for a towel rod if you like along with hang the idea near the tub/shower. Or you can find some towel or coat hooks which speak to you along with match the vibe of your bathroom along with install those. These black along with white striped Anthropologie hooks are perfect for the vintage-modern vibe I’m going for in This kind of bathroom makeover.
Use a studfinder to locate the studs in your walls. If there aren’t studs in convenient or sensible positions, use the drywall anchor method which was described for hand towels.
Attach the hooks to the wall studs (or drywall anchors), taking care which they are straight along with level with each some other.
These hooks had to be high enough on the wall which hanging towels wouldn’t hit the baseboard heater yet low enough which young children could reasonably be likely to keep their bath towels off the floor. Done. Hand along with bath towels have been taken care of.
Finishing Touch #2: Does the lighting enhance or detract?
Great lighting will be important in a bathroom, both for form along with function. The above-vanity light fixture in This kind of bathroom was exchanged for something vintage-inspired yet using a modern edge. However, there was still the main ceiling light which, in its generic builder-grade glory, felt completely out of place with all the some other customized updates. The bathroom, with its ceiling-mounted shower curtain, needed something particularly bright, flat, along with practically invisible. Enter: a flush-mount LED light.
Begin by flipping the breaker along with ensuring which the electricity will be off to the bathroom. Remove the existing light fixture’s dome along with light bulbs, then unscrew the main nut on the mounting post a little way.
Rotate the entire base counter-clockwise so the two mounting screw heads fit over the larger part of the mounting holes. When the screws are positioned, pull the fixture away via the ceiling.
Remove the wire nuts, which join the fixture wires to the house’s wires. Be sure to hold the weight of the light fixture as you unscrew along with remove these, so the idea doesn’t come crashing down.
You should notice three separate wires within the electrical box currently – a white (or light) wire, a black (or dark) wire, along with an uncovered wire. Tip: The shade references pertain to the coating on the wires, not necessarily the wires themselves.
the idea’s almost time to begin hooking up your completely new fixture; however, you’ll want to adjust the depth of the mount screws if there will be a large discrepancy between the old along with completely new fixture. This kind of will be especially the case when you’re moving to a flush-mount LED light, as the base of those fixtures tends to be quite thin.
Lift the completely new fixture up to meet the wires within the ceiling.
Attach wires together with wire nuts (white to white, black to black, along with ground to ground, which can sometimes be green-coated), then wrap electrical tape around the openings of the wire nuts for added insulation along with protection.
Gently push all wires along with wire nuts up into the electrical box to make room for the flush mount light.
When base can mount flush to the ceiling, push the idea onto the mounting screws, rotate clockwise, along with tighten the screws. Then attach completely new fixture’s dome.
This kind of flush-mount LED light fits the bill perfectly – the idea doesn’t distract or detract via the feeling of verticality within the bathroom, the idea will be all white (along with therefore minimally noticeable), along with the idea will be quite bright, which helps those bathing with the shower curtains pulled closed.
Finishing Touch #3: Can I fit in artwork on the walls?
Every bathroom could benefit via some form of wall decoration, particularly artwork. In This kind of bathroom makeover, we wanted artwork which could both continue the vertical emphasis along with bring in a bit of shade. To facilitate the eye’s ability to travel This kind of smaller space vertically (along with therefore make the idea feel larger than the idea actually will be), we added in two smaller black-along with-white chunky striped square mirrors above the towel hooks. These simple wall decorations connect the hooks themselves with the rest of the space beautifully.
In order to bring in a bit of shade without counteracting via the entire white, airiness of the bathroom, a vintage-inspired poster was framed along with mounted on the blank wall above the toilet. The poster will be Mineralogie, a decorative paper by Cavallini& Co. The content will be simple along with graphic, with colors which are rich yet muted along with surrounded by plenty of white space. All in all, This kind of poster will be a perfect blend of vintage + modern, which makes will be a lovely artwork choice for the bathroom.
Finishing Touch #4: Do accessories have form + function?
Bathroom accessories can range via complex vignettes atop bathroom shelving to a simple soap dish on the countertop…along with everywhere in between. The important thing to consider when incorporating bath accessories into your updated space will be their ability to add beauty along with/or usefulness to This kind of function-focused space. A rug, for example, will always look well within the bathroom, although the idea should probably be 100% cotton to improve its easy cleanability. along using a simple vintage brass bowl works great for holding a soap bar at the sink. Just take care to keep accessories well edited so they don’t overtake the space.
You’re reading Finishing Touches to Fully Complete a Bathroom Makeover , originally posted on Agnizer. If you enjoyed This kind of post, be sure to follow Agnizer on Google Plus along with Pinterest.
Tags: #Bathroom Remodels Before and After #Bathroom Vanities #Cheap Bathroom Remodel #Home Depot Bathroom Remodeling #Redo Bathroom #Remodel Bathroom #Senior Bathroom Makeover #Small Bathroom Makeovers Photo Gallery