How to Mount Modern House Numbers on a Rock Face

254 views

House numbers make a big impression on how a house looks. Even a dated external surfaces can look more contemporary justwith a modern style of house numbers near the front door. If the house has wood siding or similar, installing house numbers is usually easy. although if the entry has rock, brick, or concrete walls, which seems challenging. These materials aren’t easy to deal with. This specific guide will show how to mount modern house numbers onto a rock façade entry.

DIY Install House Numbers

Porch house with modern numbers

DIY Install House Numbers - old design

Here is usually an example of dated house numbers. The numbers are isolated on the side of the front door. They are also obscured by a tiered hanging basket in addition to have nothing illuminating them during dark hours.

Black painted house numbers

The style of the house numbers themselves – tole painted wooden craft blocks in a folksy font – is usually not to the homeowners’ taste, either. Read on to learn how to replace them with something more updated.

Begin by removing your old house numbers

First, removethe old house numbers. In This specific case, a hammer in addition to screwdriver (used like a chisel) removed the wooden numbers glued to the rock wall.

Remove adhesive via house numbers back

The residue left on the rock was easily removed having a heavy duty adhesive remover in addition to a file. (These removers are available at your local hardware store.)

Brand brand-new house numbers - metalic design

With the old numbers gone, which’s time to prepare the brand-new numbers. These stainless numbers are designed to be installed flush or floating. This specific tutorial shows a floating installation because they will be on an uneven rock face. House numbers should only be installed as a flush mount if the surface itself is usually smooth.

Mounting template on wall

Begin by cutting or ripping out the template numbers contained in each number’s packaging.

Tape all numbers

Tape these together doing sure which the templates are perfectly aligned in a straight line on both the top in addition to bottom edges.

position the numbers on the external surfaces wall

Roughly position the numbers on the external surfaces wall; stick them up having a smaller piece of tape.

double check all numbers pre drill holes

having a rock or brick wall, check each number’s position to make sure all drill holesavoid hitting the edge of a rock/brick. Also try to avoid the grout because of the potential for cracking or crumbling.

Make sure holes are in rock not concrete

In This specific instance, the main large rock didn’t fit all the numbers, so the number “1” had to be mounted smaller adjacent rocks. The four-digit number was positioned so the drill hole hit away via the edges of the nearby rocks.

Use level for numers position

Check numbers for level having a level; make any adjustments needed.

Add tape all around the perimeter

Add tape all around the perimeter of the taped house numbers. Make sure all drill hole marks are still visible.

Rotary hammer drills

One critical part of successfully installing house numbers onto a rock face is usually the drill bit. A carbide-tipped drill bit is usually required to be able to penetrate the rock.

Hammer Feature Tool

The some other critical component for a successful rock face drilling experience is usually the drill itself. A regular power drill having a hammer function might work, depending on the hardness of the rock/brick/concrete.

Hammer drill in action

although a thicker rock face requires an actual hammer drill, also with specially designed drill bits to penetrate rock.

DIY Install House Numbers drill in template

Following the drill bit sizes contained within the house numbers instructions, drill the holes exactly center on the template. This specific example shows drilling the pilot holes having a 1/8” drill bit, then drilling the actual mount holes into the pilot holes having a 1/4” drill bit. Hold the drill steady in addition to press which in slowly although with force; This specific will be a loud process.

DIY Install House Numbers tools

After all the holes are drilled, which is usually time to mountthe numbers. Examine the mounting screws for each number. In This specific case, because there is usually a floating or flush mount option, the mounting screws contain both a longer side in addition to shorter side.

Make numbers floating

To make the house numbers appear to be floating, the shorter side of the mounting screws should attach to the numbers, leaving the longer side exposed.

Put mounting on numbers

Put mounting screws onto each number.

Install within the wall

Dry-fit each number into its designated holes immediately before installing to ensure the holes are deep enough in addition to accurately placed. If rock debris has fallen into the back of a drilled hole, re-drill to clear which out. which is usually vital for an even floating mount.

Construction adhesive

Use clear silicone or external surfaces construction adhesive to mount the numbers.

Add adhsesive on one number at time

Choose one number, do a quick dry-fit one more time, then fill the drill holes for which number with adhesive or silicone.

How silicone is usually in holles

Fill the holes full, although not to overflowing.

Press the house numbers

Press the house number’s mounting screws into the adhesive-filled holes. Push the number in all the way so which lies flat. Wipe away any excess adhesive, if necessary.

Use tape to cover the numbers

Use masking or painter’s tape to secure the numbers in place for several hours while they dry, so there is usually no slippage. This specific example let the adhesive rest overnight.

Construction adshesive in addition to tape

When the construction adhesive (or silicone) has had time to dry thoroughly, carefully remove the tape.

DIY Install House Numbers - before in addition to after

Here is usually a before-in addition to-after photo. which is usually much more contemporary right now.

Contemporary house numbers

The floating stainless steel sans serif font numbers are, to put which plainly, much much better.

House numbers in addition to pendant porch light

The homeowners are pleased which the brand-new house numbers are installed to be lit up by the front porch light. Form in addition to function is usually an excellent design strategy.

You’re reading How to Mount Modern House Numbers on a Rock Face , originally posted on Agnizer. If you enjoyed this specific post, be sure to follow Agnizer on Google Plus in addition to Pinterest.

Tags: #Address Plaques & House Numbers #DIY Mid-Century Modern House Numbers #Modern Dwell House Numbers #Modern House Numbers #Popular items for house numbers on Etsy